| Application | Type | Ap (mm) | Fn (mm/rev) | Grade | |||||||||||
| CVD | PVD | ||||||||||||||
| VK4215 | VK4315 | VK4225 | VK4325 | VK4235 | VK4335 | VK1005 | VK1035 | VK1328 | VK1505 | VR1525 | VR1010 | ||||
| Small Parts Machining | DCGT11T301- FS | 0.10-1.50 | 0.02- 0.06 | • | O | O | |||||||||
| DCGT11T302- FS | 0.20-2.00 | 0.05- 0.12 | • | O | O | ||||||||||
| DCGT11T304- FS | 0.20-2.50 | 0.08- 0.25 | • | O | O | ||||||||||
| DCGT11T308- FS | 0.30-3.00 | 0.10- 0.30 | • | O | O | ||||||||||
| Length | Size(mm) | |||
| IC | S | d | r | |
| 7 | 6.35 | 2.38 | 2.8 | 0.05-0.2 |
| 11 | 9.525 | 3.97 | 4.4 | 0.1-0.2 |
1.What is a machining insert? A wiper insert is an insert used in a milling machine or a lathe. It is designed for finished cutting, to give a smooth surface on the surface being cut. It uses special geometry to give a good finish on the work-piece at a higher-than-normal federate. 2.How to choose correct turning insert? Select insert geometry based on selected operation, for example finishing. Select the largest possible nose angle on the insert for strength and economy. Select the insert size depending on the depth of cut Select the largest possible nose radius for insert strength. 3.What is the difference between face milling and end milling? These are two of the most prevalent milling operations, each using different types of cutters – the and mill and the face mill. The difference between end milling and face milling is that an end mill uses both the end and the sides of the cutter, whereas face milling is used for horizontal cutting. 4.Is non-standard products available? Yes, we accept OEM ODM orders Hot Tags: cemented carbide inserts, China, suppliers, factory, buy, price, cheap, quotation, free sample