Helical Milling Inserts SPMT Carbide Insert

Product name: SPMT insert Series: SPMT Chip-Breakers: PM / KM

Products Details

Helical milling is a hole-making machining process in which the cutter proceeds a helical path while rotating around its own axis, used to produce helical parts like helical gears, spiral flute milling cutters, twist drills, and helical cam grooves. SPMT for helical milling. S - Square shape of turning insert. P - Insert with clearance under main cutting edge (11°). M - Tolerances and dimensions of carbide turning insert. T - Hole through insert and single sided chip breaker.1.How to choose the grade? Grades of inserts are selected primarily based on: The ISO P, M, K, N, S, and H components indicate the method (finishing, medium, roughing) Manufacturing conditions (good, average, difficult) 2.How to choose an insert shape? Selecting the smallest possible nose angle is recommended to provide insert strength and reliability. The margin for error has to be weighed against the variety of cuts made. It requires more machine power and is more likely to vibrate more strongly when the nose angle is large. In addition to having a smaller nose angle, a minor cutting edge engagement can also make it more heat-sensitive as both of these things are weaker and more sensitive to heat. 3.How to choose a size? Adapting the insert size to the application’s requirements, as well as the space available for the cutting tool, should be considered. The stability increases when the insert has a larger size. If you are going to be doing heavy machining, then the insert size should usually be over I.C. 25 mm (1 inch). In many cases, the size of a finished product can be reduced when it is finished.

Type

Ap

(mm)

Fn

(mm/rev)

Grade

CVD

PVD

VK3020

VK3040

VK1025

VK1325

VK1525

VK1328

VR1010

VR1520

VR1525

VR1028

VR1330

SPMT120408-PM

1.00-

6.00

0.06-

0.15

O

O

SPMT120408-KM

1.00-

6.00

0.06-

0.15

O

O

• : Recommended Grade O: Optional Grade

Length

Size(mm)

r

L

IC

S

d

12

0.8

12.7

12.7

4.76

5.5

1The type of carbide grade and the coating on inserts are originally intended for steel, stainless steel and cast iron. But it also performs when milling other alloys.

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours