| Width | Size(mm) | ||
| S | r±0.1 | L | |
| 200 | 2.0 | 1.0 | 16 |
| 300 | 3.0 | 1.5 | 21 |
| 400 | 4.0 | 2.0 | 21 |
| 500 | 5.0 | 2.5 | 26 |
| 600 | 6.0 | 3.0 | 26 |
| 800 | 8.0 | 4.0 | 31 |
1.How to choose correct turning insert? Select insert geometry based on selected operation, for example finishing. Select the largest possible nose angle on the insert for strength and economy. Select the insert size depending on the depth of cut Select the largest possible nose radius for insert strength. 2.What is the difference between face milling and end milling? These are two of the most prevalent milling operations, each using different types of cutters – the and mill and the face mill. The difference between end milling and face milling is that an end mill uses both the end and the sides of the cutter, whereas face milling is used for horizontal cutting. 3.What is your MOQ? MOQ 10pcs 4.Do you offer samples? Yes, we do offer samples. However, buyers need to pay for the freight charge. In addition, whether samples are free or not depends on the quantity you buy.| Type | Fn (mm/rev) | Grade | ||||||||||
| CVD | PVD | |||||||||||
| VK4215 | VK4225 | VK4235 | VK4315 | VK4325 | VK1025 | VK1325 | VK1328 | VK1528 | VR1010 | VR1525 | ||
| ERMN200-M | 0.05-0.15 | • | O | • | O | O | ||||||
| ERMN300-M | 0.08-0.18 | • | O | • | O | O | ||||||
| ERMN400-M | 0.10-0.20 | • | O | • | O | O | ||||||
| ERMN500-M | 0.12-0.23 | • | O | • | O | O | ||||||
| ERMN600-M | 0.15-0.27 | • | O | • | O | O | ||||||
| ERMN800-M | 0.18-0.35 | • | O | • | O | O | ||||||